带约束的线性模型的参数估计及其效率分析

考虑带有齐次线性等式约束的线性模型在设计阵X和约束阵H满足适当条件时,给出了参数的约束LS估计与BLU估计的简洁表达式,较合理地定义了相对于的相对效率e,最后得到了的一个下界。     

单片微机相位测量系统

本文介绍了应用单片微型计算机技术的智能化相位测量系统。该系统由软件支持,克服了硬件上的许多缺陷,具有测量精度高、工作频带宽、使用简单等特点。     

流体动压超光滑加工关键工艺参数优化

流体动压超光滑加工材料去除主要受工件表面流体动压和剪切分布的影响,根据材料去除的理论模型分析了影响材料去除的关键工艺参数。基于流体动力学仿真和具体实验对抛光轮浸没深度、抛光轮转速和抛光轮间隙对流体动压超光滑加工的材料去除速率的影响规律进行了研究。分析结果表明:抛光轮的浸没深度对材料去除速率影响不大;材料去除速率随着抛光轮转速的减小、抛光间隙的增大而减小;考虑实际使用条件,最优抛光轮转速为300 r/min、抛光间隙为25μm、抛光轮浸没深度为(2/3)R。同时对抛光头温度稳定性进行了具体实验测试,其在装置启动后4 h基本达到热平衡,通过试运行预热的方式可有效避免温升变化对抛光间隙的影响。     

面向大规模交互数据空间划分的Voronoi图生成算法及应用

传统Voronoi图对大量点集进行Voronoi划分时会产生Voronoi单元格数过多的现象,导致难以适用于地理信息系统、生物医学等诸多领域.为了解决这个问题,提出一种自适应基于密度的聚类算法(Density-Based Spatial Clustering of Applications with Noise,DBS...     

高功率电磁环境下导弹发射阵地近地面电磁脉冲波形仿真*

主要研究在高功率电磁环境下高空核爆到达导弹预设作战阵地近地面时的电磁脉冲环境.首先给出高空核爆电磁脉冲场近地面计算的理论基础,然后分析不同条件下近地面的电磁脉冲环境参数,编程实现了基于时域有限差分算法的电磁脉冲波形数值仿真,完成了多种特定预设战场环境下的电磁脉冲计算,最后给出由于电磁脉冲武器的发展和HEMP波形表述形式变化,给导弹武器系统抗电磁脉冲性能研究带来的影响和新动态趋势.结论认为:应加强对前沿更陡、强度更强电磁脉冲的抵抗能力,防御重点放在机动作战样式方面,提高战地战时抗毁生存能力.     

Influence of multiple structural parameters on interior ballistics based on orthogonal test methods

Influence of multiple structural parameters on the performance of a gun launch system driven by high-pressure reactive gases is important for structural design and performance adjustment. A coupled lumped parameter model was utilized to predict the propellant combustion, and a dynamic finite element method was applied to approximate the mechanical interactions between the projectile and the barrel. The combustion and the mechanical interactions were coupled through a user subroutine interface in ABAQUS. The correctness and the capability of the finite element approximations in capturing small structural changes were validated by comparing predicted resistance with experiments. Based on the coupled model, the influence of structural parameters of a medium-caliber gun on the system performance was investigated. In order to reduce the research costs, orthogonal tests were designed to investigate the comprehensive effects of the parameters. According to statistical analysis, the important order of the structural parameters on the launching process was obtained. The results indicate that the influence of the width of the rotating band stands out among the studied parameters in the gun. The work provides a method to investigate the influence of multiple parameters on system performance and gives guidance for controlling the system performance.     

Chirp信号参数估计算法性能比较

通过数值仿真定量地比较了三种Chirp信号参数估计算法——解线调法、迭代估计法和局部搜索最大似然法的性能,并定性地比较了算法的运算量。仿真结果表明,在三种算法中,局部搜索最大似然法的估计性能最好,而运算量居中;解线调法运算量最大,但估计性能居中;迭代估计法的估计性能最差,但运算量最小。对于实际系统,应根据不同的估计精度和运算量要求,灵活选择不同的算法。综合考虑估计性能和运算量之间的折衷可以得到结论,在三种算法中局部搜索最大似然法是一种相对较好的选择。     

一种通用网络通信系统的设计与实现

在TCP/IP协议的基础上,采用合理的软件结构、算法以及对同一主机的多网卡支持,设计了一种可应用于大型分布式处理(如分布式仿真)的多机通信系统,目标是屏蔽诸如IP地址、端口号、套接字等网络通信概念,实现一种通用的进行网络通信实时可靠传输的机制,避免类似程序的重复开发,使网络通信的实现更加容易。应用结果表明,系统使用容易、通用性强,实现了对通信服务的实时传输和可靠传输的支持。     

结构方程模型参数估计的GME方法

提出应用广义最大熵的方法对结构方程模型的参数进行估计,该方法能够处理有限的或者不完全数据。为了验证广义最大熵方法在估计结构方程模型参数时的性能,采用了一个应用于美国顾客满意指数(ACSI)的结构方程模型生成仿真数据,仿真结果表明,与PLS相比,GME方法具有更高的拟合精度和较低的预测误差,在样本数据较少时,表现更为明显。     

Estimation of the kinetic parameters for thermal decomposition of HNIW and its adiabatic time-to-explosion by Kooij formula

A differential/integral method to estimate the kinetic parameters (apparent activation energy E_a and pre-exponential factor A) for thermal decomposition reaction of energetic materials based on Kooij formula are applied to study the nonisothermal decomposition reaction kinetics of hexanitrohexaazaisowurtzitane (HNIW) by analyzing nonisothermal DSC curve data. The apparent activation energy (E_a) obtained by the integral isoconversional non-isothermal method based on Kooij formula is used to check the constancy and validity of apparent activation energy by the differential/integral method based on Kooij formula. The most probable mechanism function of thermal decomposition reaction of HNIW is determined by a logical choice method. The equations for calculating the critical temperatures of thermal explosion (T_b) and adiabatic time-to-explosion (t_TIad) based on Kooij formula are used to calculate the values of T_b and t_TIad to evaluate the thermal safety and heat-resistant ability of HNIW. All the original data needed for analyzing the kinetic parameters are from nonisothermal DSC curves. The results show that the kinetic model function in differential form and the values of E_a and A of decomposition reaction of HNIW are 3(1 − α)[−ln(1 − α)]^2/3, 152.73 kJ mol⁻¹ and 10^11.97 s⁻¹, respectively, and the values of self-accelerating decomposition temperature (T_SADT), T_b and t_TIad are 486.55 K, 493.11 K and 52.01 s, respectively.